Delta Water Mixing and Dispensing Devices

Deltamatic Economic and Economic-S for precisely dosed and tempered make-up water, ideal for ice water. New units available immediately from stock, shipping throughout Europe.

2 Products

Delta water mixing and dispensing devices for bakeries

The correct water temperature is one of the most important factors for consistent dough quality. With Delta's Deltamatic devices, the bulk water is measured electronically to within 0.1 liters and, if desired, additionally mixed to the desired temperature. At bakeryparts.com, you can purchase the Deltamatic Economic and Deltamatic Economic-S models as new devices, available immediately from stock.

About Delta

Delta Bäckerei-Maschinen Wilhelm Hölscher GmbH is based in Gütersloh in East Westphalia and has been developing technology for bakeries and confectioneries for over 40 years. Its focus is on mixing and dispensing water, ice water cooling, and bread slicers. Deltamatic devices are widely used in both craft and industrial bakeries and are considered precise, robust, and easy to use.

Which Delta devices do we offer?

Deltamatic Economic – water mixing and dispensing device

The Economic mixes cold and hot water using a thermostatic mixing valve to the desired temperature and dispenses the set amount.

  • Dispensing volume: 0.1 to 999.9 liters
  • Temperature range: 1 to 80 °C, temperature accuracy ±1 °C
  • Dispensing accuracy: ±1% from 5 liters
  • Connections: two water connections, making the dispensing independent of water pressure
  • Housing: compact stainless steel housing for wall mounting

Deltamatic Economic-S – water dispensing device

The Economic-S is the slimmer version without a mixing valve. It dispenses water that is already at the correct temperature, for example, ice water from a cooling unit.

  • Water connection: only one, making installation particularly easy
  • Accuracy: same dispensing accuracy as the Economic
  • Dimensions and weight: 24.5 cm wide and weighing 5 kg

Economic or Economic-S – which device is right for your bakery?

The choice depends on whether the device should regulate the temperature itself:

  • The Economic is right if cold and hot water need to be automatically mixed to a target temperature, for example for doughs with varying temperature requirements.
  • The Economic-S is right if you mainly dispense ice water or water that has already been tempered. It is the simpler and more affordable solution.

Why bulk water temperature is so important

Dough temperature affects fermentation, dough stability, and baking results. Flour and room temperature are difficult to control in everyday practice, but bulk water temperature can be. A water dispensing device ensures that every batch is made with the same amount and temperature of water. This reduces variations between shifts and employees and saves time when weighing out water.

Combination with ice water cooling units

Both Deltamatic models can be combined with ice water cooling units, including devices from Delta and other manufacturers.

  • Economic-S: A three-way valve is required. This allows cooled bulk water to be dispensed in the range of approximately 2 to 15 °C, for example for wheat doughs.
  • Economic: It is connected via two three-way valves. Hot water and cooled water must not be connected at the same time, otherwise the thermostatic mixing valve will be damaged.

What should you consider before purchasing?

  1. Clarify the application: Do you need tempered mixed water or just precise volume dispensing?
  2. Check water connections: The Economic requires two R 1/2-inch connections, while the Economic-S requires one.
  3. Check water pressure: It should be between 1 and 5 bar.
  4. Provide a power connection: 230 V, 50–60 Hz are required, and the power consumption is 30 W.
  5. Plan for ice water cooling: If available, provide three-way valves for the combination.

Installation should be carried out by qualified specialist personnel. Are you unsure which model is right for your business? Write to us at sales@bakeryparts.com, and we will be happy to advise you.

Häufige Fragen

Welche Delta-Geräte bietet bakeryparts.com an?+

Wir führen das Deltamatic Economic Wassermisch- und Dosiergerät sowie das Deltamatic Economic-S Wasserdosiergerät. Beide Geräte sind Neugeräte und sofort ab Lager verfügbar.

Was ist der Unterschied zwischen Deltamatic Economic und Economic-S?+

Das Economic besitzt eine Thermostat-Mischbatterie und zwei Wasseranschlüsse. Es mischt Kalt- und Warmwasser auf eine eingestellte Temperatur mit einer Genauigkeit von ±1 °C. Das Economic-S kommt ohne Mischbatterie aus, benötigt nur einen Wasseranschluss und dosiert Wasser, das bereits die gewünschte Temperatur hat, zum Beispiel Eiswasser.

Wie genau dosieren die Deltamatic-Geräte?+

Beide Modelle dosieren ab 5 Litern mit einer Genauigkeit von ±1 %. Die Menge lässt sich in 0,1-Liter-Schritten zwischen 0,1 und 999,9 Litern einstellen, sodass auch kleine Chargen zuverlässig dosiert werden.

Kann ich ein Delta-Dosiergerät mit meinem vorhandenen Eiswasserkühlgerät kombinieren?+

Ja. Beide Deltamatic-Modelle lassen sich mit Eiswasserkühlgeräten von Delta und mit Fremdfabrikaten kombinieren. Das Economic-S wird über ein Dreiwegeventil angeschlossen, das Economic über zwei Dreiwegeventile.

Welche Voraussetzungen braucht die Installation?+

Benötigt werden ein Wasserdruck von 1 bis 5 bar, ein Stromanschluss mit 230 V und, je nach Modell, ein oder zwei Wasseranschlüsse mit R 1/2 Zoll. Ein Auslaufschlauch mit 2,5 m Länge und das Anschlusszubehör sind im Lieferumfang enthalten. Der Einbau sollte durch qualifiziertes Fachpersonal erfolgen.

Wie schnell werden Delta-Geräte geliefert?+

Beide Modelle sind als Neugeräte sofort ab Lager verfügbar und werden europaweit versendet. Innerhalb Deutschlands ist der Versand ab einem Bestellwert von 150 € kostenfrei. Bei Fragen zur Lieferzeit in Ihr Land schreiben Sie uns an sales@bakeryparts.com.