Unwinder Spare Parts

Available immediately: Scrapers, scales, belts and small parts for Fritsch and Rondo dough sheeters. Shipping to bakeries and confectioneries throughout Europe.

16 Products

Spare parts for dough sheeters in bakeries and confectioneries

Dough sheeters are among the most frequently used machines in bakeries and confectioneries. Whether puff pastry, laminated dough, croissants or shortcrust pastry: large quantities of dough pass over belts and through rollers every day. As a result, scrapers, belts and adjustment mechanisms are subject to heavy wear. Here you will find suitable spare parts for dough sheeters from Fritsch and Rondo.

For which dough sheeters do we carry spare parts?

Fritsch dough sheeters

Fritsch from Markt Einersheim in Lower Franconia is one of the best-known manufacturers of dough sheeters. The Rollfix series is particularly widespread. We carry, among other items, scrapers for types 520, 600 and 630, scales for the long roller cover and roller adjustment, as well as small parts such as shank springs, wing nuts and brackets.

Rondo dough sheeters

Rondo from Burgdorf in Switzerland manufactures dough sheeters for craft and industrial use, which are in operation in many bakeries throughout Europe. For Rondo machines, we carry conveyor belts in the appropriate dimensions.

Which spare parts are most frequently needed for dough sheeters?

The following components wear out most frequently during daily operation:

  • Scrapers and angled scrapers: They keep the rollers clean and prevent dough from sticking.
  • Conveyor belts: They guide the dough through the machine and wear out over time at the edges and on the surface.
  • Scales and adjustment elements: They indicate the roller opening or dough thickness.
  • Springs, nuts and brackets: These small parts hold the scrapers and levers in position.

Timely replacement ensures uniform dough sheets and prevents consequential damage to the rollers and drive.

Typical problems with dough sheeters and possible causes

Dough sticks to the rollers

Possible causes: worn or bent scrapers, a slack scraper spring or an incorrectly adjusted scraper.

Belt runs crooked or slips

Possible causes: a worn or stretched conveyor belt, incorrect belt tension or dirty idler pulleys.

Dough thickness does not match the setting

Possible causes: a damaged or slipped scale, play in the feeding mechanism or loosened fastening parts on the feeding lever.

Machine does not start

Possible causes: an open or incorrectly detected safety guard, a defective switch or a problem in the electrical control system.

How do I find the right spare part for my dough sheeter?

  1. Manufacturer: for example Fritsch or Rondo.
  2. Read the type and model: The information is on the machine's nameplate.
  3. Check dimensions: For scrapers, the working width and design are crucial. For belts, length, width and connection type matter.
  4. Compare or request the part number: The number is often found on the old part or in the spare parts list.

If no part number is available, the spare part can be identified using a photo. Use our spare parts request form or write to us at sales@bakeryparts.com.

When should spare parts on the dough sheeter be replaced?

Replacement is necessary if:

  • Dough remains stuck to the rollers despite cleaning
  • Scrapers are visibly worn, torn or bent
  • Belts show frayed edges, tears or a worn-smooth surface
  • the set dough thickness is no longer reliably achieved

Regular cleaning and maintenance can significantly extend the service life of a dough sheeter.

Häufige Fragen

Für welche Ausrollmaschinen bietet bakeryparts.com Ersatzteile an?+

Wir führen Ersatzteile für Ausrollmaschinen von Fritsch, unter anderem für die Rollfix-Baureihe und die Typen 520, 600 und 630, sowie Transportbänder für Rondo Ausrollmaschinen. Bei Fragen zu einem bestimmten Modell können Sie uns jederzeit kontaktieren.

Was sind typische Verschleißteile bei Ausrollmaschinen?+

Am häufigsten werden Abstreifer, Winkelabstreifer, Transportbänder, Skalen sowie Federn und Befestigungsteile benötigt. Diese Komponenten sind im täglichen Betrieb ständig in Kontakt mit Teig und Mehl und unterliegen einem natürlichen Verschleiß.

Warum klebt der Teig an den Walzen meiner Ausrollmaschine?+

Häufig sind die Abstreifer verschlissen, verbogen oder nicht mehr richtig eingestellt. Auch eine erschlaffte Abstreiferfeder kann die Ursache sein. In vielen Fällen löst ein neuer Abstreifer das Problem.

Welche Angaben brauche ich, um ein Ersatzband für meine Rondo Ausrollmaschine zu bestellen?+

Wichtig sind das genaue Maschinenmodell vom Typenschild sowie Länge, Breite und Verbindungsart des Bandes. Wenn Sie unsicher sind, senden Sie uns ein Foto des Typenschilds und des alten Bandes an sales@bakeryparts.com.

Wie finde ich das richtige Ersatzteil für meine Ausrollmaschine?+

Am einfachsten über die Modellauswahl auf dieser Seite. Alternativ können Sie uns Hersteller, Modellbezeichnung und Baujahr mitteilen oder ein Foto des defekten Teils an sales@bakeryparts.com senden.

Wie schnell werden Ersatzteile für Ausrollmaschinen geliefert?+

Ein Großteil unserer Ersatzteile ist sofort ab Lager verfügbar und wird europaweit versendet. Innerhalb Deutschlands ist der Versand ab einem Bestellwert von 150 € kostenfrei.